Feat: import Makefile and use it!
This commit is contained in:
parent
32f6e31b9b
commit
785d4938f5
166
esp32_radio/Makefile
Normal file
166
esp32_radio/Makefile
Normal file
@ -0,0 +1,166 @@
|
|||||||
|
# Makefile for Arduino based scketches
|
||||||
|
#
|
||||||
|
# Copyright 2020 Valerio Di Giampietro http://va.ler.io v@ler.io
|
||||||
|
# MIT License - see License.txt file
|
||||||
|
#
|
||||||
|
# This Makefile uses the arduino-cli, the Arduino command line interface
|
||||||
|
# and has been designed and tested to run on Linux, not on Windows.
|
||||||
|
# Probably it will run on a Mac, but it has not been tested.
|
||||||
|
#
|
||||||
|
# Please note that:
|
||||||
|
#
|
||||||
|
# 1. each sketch must reside in his own folder with this Makefile
|
||||||
|
#
|
||||||
|
# 2. the main make targets are:
|
||||||
|
# - all compiles and upload
|
||||||
|
# - compile compiles only
|
||||||
|
# - upload upload via serial port, compile if the binary file is
|
||||||
|
# not available
|
||||||
|
# - ota upload Over The Air, automatically find the device
|
||||||
|
# IP address using the IOT_NAME (device hostname)
|
||||||
|
# - clean clean the build directory
|
||||||
|
# - find find OTA updatable devices on the local subnet
|
||||||
|
# - requirements it the file "requirements.txt" exists it will
|
||||||
|
# install the libraries listed in this file
|
||||||
|
#
|
||||||
|
# default is "all"
|
||||||
|
#
|
||||||
|
# 3. it gets the name of the sketch using the wildcard make command;
|
||||||
|
# the name is *.ino; this means that you must have ONLY a file
|
||||||
|
# with .ino extension, otherwise this makefile will break. This
|
||||||
|
# also means that you can use this Makefile, almost unmodified,
|
||||||
|
# for any sketch as long as you keep a single .ino file in each
|
||||||
|
# folder
|
||||||
|
#
|
||||||
|
# 4. you can split your project in multiple files, if you wish,
|
||||||
|
# using a single .ino file and multiple .h files, that you can
|
||||||
|
# include in the .ino file with an '#include "myfile.h"'
|
||||||
|
# directive
|
||||||
|
#
|
||||||
|
# Optionally some environment variables can be set:
|
||||||
|
#
|
||||||
|
# FQBN Fully Qualified Board Name; if not set in the environment
|
||||||
|
# it will be assigned a value in this makefile
|
||||||
|
#
|
||||||
|
# SERIAL_DEV Serial device to upload the sketch; if not set in the
|
||||||
|
# environment it will be assigned:
|
||||||
|
# /dev/ttyUSB0 if it exists, or
|
||||||
|
# /dev/ttyACM0 if it exists, or
|
||||||
|
# unknown
|
||||||
|
#
|
||||||
|
# IOT_NAME Name of the IOT device; if not set in the environment
|
||||||
|
# it will be assigned a value in this makefile. This is
|
||||||
|
# very useful for OTA update, the device will be searched
|
||||||
|
# on the local subnet using this name
|
||||||
|
#
|
||||||
|
# OTA_PORT Port used by OTA update; if not set in the environment
|
||||||
|
# it will be assigned the default value of 8266 in this
|
||||||
|
# makefile
|
||||||
|
#
|
||||||
|
# OTA_PASS Password used for OTA update; if not set in the environment
|
||||||
|
# it will be assigned the default value of an empty string
|
||||||
|
#
|
||||||
|
# V verbose flag; can be 0 (quiet) or 1 (verbose); if not set
|
||||||
|
# in the environment it will be assigned a default value
|
||||||
|
# in this makefile
|
||||||
|
|
||||||
|
|
||||||
|
MAKE_DIR := $(PWD)
|
||||||
|
#
|
||||||
|
# ----- setup wor Wemos D1 mini -----
|
||||||
|
FQBN ?= esp32:esp32:esp32
|
||||||
|
IOT_NAME ?= esp32-radio
|
||||||
|
OTA_PORT ?= 8266
|
||||||
|
OTA_PASS ?=
|
||||||
|
# ----- setup for Arduino Uno
|
||||||
|
#FQBN ?= arduino:avr:uno
|
||||||
|
# ----- ---------------------
|
||||||
|
V ?= 0
|
||||||
|
VFLAG =
|
||||||
|
|
||||||
|
ifeq "$(V)" "1"
|
||||||
|
VFLAG =-v
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifndef SERIAL_DEV
|
||||||
|
ifneq (,$(wildcard /dev/ttyUSB0))
|
||||||
|
SERIAL_DEV = /dev/ttyUSB0
|
||||||
|
else ifneq (,$(wildcard /dev/ttyACM0))
|
||||||
|
SERIAL_DEV = /dev/ttyACM0
|
||||||
|
else
|
||||||
|
SERIAL_DEV = unknown
|
||||||
|
endif
|
||||||
|
endif
|
||||||
|
|
||||||
|
BUILD_DIR := $(subst :,.,build/$(FQBN))
|
||||||
|
|
||||||
|
SRC := $(wildcard *.ino)
|
||||||
|
HDRS := $(wildcard *.h)
|
||||||
|
BIN := $(BUILD_DIR)/$(SRC).bin
|
||||||
|
ELF := $(BUILD_DIR)/$(SRC).elf
|
||||||
|
|
||||||
|
$(info FQBN is [${FQBN}])
|
||||||
|
$(info IOT_NAME is [${IOT_NAME}])
|
||||||
|
$(info OTA_PORT is [${OTA_PORT}])
|
||||||
|
$(info OTA_PASS is [${OTA_PASS}])
|
||||||
|
$(info V is [${V}])
|
||||||
|
$(info VFLAG is [${VFLAG}])
|
||||||
|
$(info MAKE_DIR is [${MAKE_DIR}])
|
||||||
|
$(info BUILD_DIR is [${BUILD_DIR}])
|
||||||
|
$(info SRC is [${SRC}])
|
||||||
|
$(info HDRS is [${HDRS}])
|
||||||
|
$(info BIN is [${BIN}])
|
||||||
|
$(info SERIAL_DEV is [${SERIAL_DEV}])
|
||||||
|
|
||||||
|
all: $(ELF) upload
|
||||||
|
.PHONY: all
|
||||||
|
|
||||||
|
compile: $(ELF)
|
||||||
|
.PHONY: compile
|
||||||
|
|
||||||
|
$(ELF): $(SRC) $(HDRS)
|
||||||
|
arduino-cli compile -b $(FQBN) $(VFLAG)
|
||||||
|
@if which arduino-manifest.pl; \
|
||||||
|
then echo "---> Generating manifest.txt"; \
|
||||||
|
arduino-manifest.pl -b $(FQBN) $(SRC) $(HDRS) > manifest.txt; \
|
||||||
|
else echo "---> If you want to generate manifest.txt, listing used libraries and their versions,"; \
|
||||||
|
echo "---> please install arduino-manifest, see https://github.com/digiampietro/arduino-manifest"; \
|
||||||
|
fi
|
||||||
|
|
||||||
|
upload:
|
||||||
|
@if [ ! -c $(SERIAL_DEV) ] ; \
|
||||||
|
then echo "---> ERROR: Serial Device not available, please set the SERIAL_DEV environment variable" ; \
|
||||||
|
else echo "---> Uploading sketch\n"; \
|
||||||
|
arduino-cli upload -b $(FQBN) -p $(SERIAL_DEV) $(VFLAG); \
|
||||||
|
fi
|
||||||
|
|
||||||
|
ota:
|
||||||
|
@PLAT_PATH=`arduino-cli compile -b $(FQBN) --show-properties | grep '^runtime.platform.path' | awk -F= '{print $$2}'` ; \
|
||||||
|
PY_PATH=`arduino-cli compile -b $(FQBN) --show-properties | grep '^runtime.tools.python3.path' | awk -F= '{print $$2}'` ; \
|
||||||
|
IOT_IP=`avahi-browse _arduino._tcp --resolve --parsable --terminate|grep -i ';$(IOT_NAME);'|grep ';$(OTA_PORT);'| awk -F\; '{print $$8}'|head -1`; \
|
||||||
|
BINFILE=$(wildcard $(BUILD_DIR)/$(SRC)*bin); \
|
||||||
|
echo "PLAT_PATH is [$$PLAT_PATH]" ; \
|
||||||
|
echo "PY_PATH: is [$$PY_PATH]" ; \
|
||||||
|
echo "IOT_IP: is [$$IOT_IP]" ; \
|
||||||
|
echo "BINFILE: is [$$BINFILE]" ; \
|
||||||
|
if [ "$$IOT_IP" = "" ] ; \
|
||||||
|
then echo "Unable to find device IP. Check that the IOT_NAME environment variable is correctly set. Use 'make find' to search devices"; \
|
||||||
|
else echo "---> Uploading Over The Air"; \
|
||||||
|
$$PY_PATH/python3 $$PLAT_PATH/tools/espota.py -i $$IOT_IP -p $(OTA_PORT) --auth=$(OTA_PASS) -f $$BINFILE ;\
|
||||||
|
fi
|
||||||
|
|
||||||
|
clean:
|
||||||
|
@echo "---> Cleaning the build directory"
|
||||||
|
rm -rf build
|
||||||
|
|
||||||
|
find:
|
||||||
|
avahi-browse _arduino._tcp --resolve --parsable --terminate
|
||||||
|
|
||||||
|
requirements:
|
||||||
|
@if [ -e requirements.txt ]; \
|
||||||
|
then while read -r i ; do echo ; \
|
||||||
|
echo "---> Installing " '"'$$i'"' ; \
|
||||||
|
arduino-cli lib install "$$i" ; \
|
||||||
|
done < requirements.txt ; \
|
||||||
|
else echo "---> MISSING requirements.txt file"; \
|
||||||
|
fi
|
||||||
@ -11,7 +11,7 @@ Audio audio;
|
|||||||
String ssid = WIFI_SSID;
|
String ssid = WIFI_SSID;
|
||||||
String password = WIFI_PASSWD;
|
String password = WIFI_PASSWD;
|
||||||
|
|
||||||
void setup {
|
void setup() {
|
||||||
Serial.begin(115200);
|
Serial.begin(115200);
|
||||||
WiFi.disconnect();
|
WiFi.disconnect();
|
||||||
WiFi.mode(WIFI_STA);
|
WiFi.mode(WIFI_STA);
|
||||||
@ -34,7 +34,9 @@ void setup {
|
|||||||
|
|
||||||
audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT);
|
audio.setPinout(I2S_BCLK, I2S_LRC, I2S_DOUT);
|
||||||
audio.setVolume(5);
|
audio.setVolume(5);
|
||||||
|
// audio.connecttohost("http://192.168.2.216:8000/06%20-%20H4dopi.mp3");
|
||||||
audio.connecttohost("http://icecast.radiofrance.fr/franceinter-midfi.mp3");
|
audio.connecttohost("http://icecast.radiofrance.fr/franceinter-midfi.mp3");
|
||||||
|
// audio.connecttohost("0n-80s.radionetz.de:8000/0n-70s.mp3");
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
Loading…
Reference in New Issue
Block a user