dotfiles/sway/.config/gammastep/config.ini

59 lines
2.3 KiB
INI
Raw Normal View History

2022-01-06 20:28:56 +00:00
; Global settings
[general]
; Set the day and night screen temperatures
temp-day=5700
2022-05-21 20:01:31 +00:00
temp-night=4000
2022-01-06 20:28:56 +00:00
; Disable the smooth fade between temperatures when Redshift starts and stops.
; 0 will cause an immediate change between screen temperatures.
; 1 will gradually apply the new screen temperature over a couple of seconds.
fade=1
; Solar elevation thresholds.
; By default, Redshift will use the current elevation of the sun to determine
; whether it is daytime, night or in transition (dawn/dusk). When the sun is
; above the degrees specified with elevation-high it is considered daytime and
; below elevation-low it is considered night.
;elevation-high=3
;elevation-low=-6
; Custom dawn/dusk intervals.
; Instead of using the solar elevation, the time intervals of dawn and dusk
; can be specified manually. The times must be specified as HH:MM in 24-hour
; format.
;dawn-time=6:00-7:45
;dusk-time=18:35-20:15
; Set the screen brightness. Default is 1.0.
2022-05-21 20:01:31 +00:00
; brightness=0.8
2022-01-06 20:28:56 +00:00
; It is also possible to use different settings for day and night
; since version 1.8.
2022-05-21 20:01:31 +00:00
brightness-day=1
brightness-night=0.7
2022-01-06 20:28:56 +00:00
; Set the screen gamma (for all colors, or each color channel
; individually)
2022-05-21 20:01:31 +00:00
; gamma=0.8
2022-01-06 20:28:56 +00:00
;gamma=0.8:0.7:0.8
; This can also be set individually for day and night since
; version 1.10.
2022-05-21 20:01:31 +00:00
gamma-day=0.8:0.7:0.8
gamma-night=0.7
2022-01-06 20:28:56 +00:00
; Set the location-provider: 'geoclue2', 'manual'.
; The location provider settings are in a different section.
location-provider=manual
; Set the adjustment-method: 'randr', 'vidmode', 'drm', 'wayland'.
; 'randr' is the preferred X11 method, 'vidmode' is an older API
; that works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=wayland
; Configuration of the location-provider:
; type 'gammastep -l PROVIDER:help' to see the settings.
; ex: 'gammastep -l manual:help'
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
; are negative numbers.
[manual]
2022-05-21 20:01:31 +00:00
lat=46.2
lon=5.7
2022-01-06 20:28:56 +00:00
; Configuration of the adjustment-method
; type 'gammastep -m METHOD:help' to see the settings.
; ex: 'gammastep -m randr:help'
; In this example, randr is configured to adjust only screen 0.
; Note that the numbering starts from 0, so this is actually the first screen.
; If this option is not specified, Redshift will try to adjust _all_ screens.