hypr: package séparé avec --no-folding pour compatibilité source= hyprland

Hyprland ne suit pas les symlinks de répertoires dans les directives source=.
Package hypr/ distinct du package hyprland/, stowé avec --no-folding pour
créer des symlinks fichier par fichier dans ~/.config/hypr/.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

hypr/.config/hypr/conf.d/hyprlock.conf

@@ -0,0 +1,3 @@
+# Verrouillage manuel de l'écran
+# SUPER + X pour verrouiller, mot de passe pour déverrouiller
+bind = $mainMod, x, exec, hyprlock

hypr/.config/hypr/conf.d/voxtype-submap.conf

@@ -0,0 +1,33 @@
+# Voxtype compositor integration
+# Fixes modifier key interference when using compositor keybindings
+# Generated by: voxtype setup compositor hyprland
+#
+# Two submaps are used:
+# - voxtype_recording: Active during recording/transcription. F12 cancels.
+# - voxtype_suppress: Active during text output. Blocks modifier keys.
+#
+# NOTE: Do not bind Escape in voxtype_suppress. Binding Escape causes wtype's
+# first character to be dropped. See: https://github.com/hyprwm/Hyprland/issues/3165
+
+bind  = $mainMod, v, exec, voxtype record toggle
+# bindr = SUPER, V, exec, voxtype record stop
+
+# Recording submap - active during recording and transcription
+# F12 cancels recording/transcription and returns to normal
+submap = voxtype_recording
+bind = , F12, exec, voxtype record cancel
+bind = , F12, submap, reset
+submap = reset
+
+# Output submap - blocks modifier keys during text output
+submap = voxtype_suppress
+bind = , SUPER_L, exec, true
+bind = , SUPER_R, exec, true
+bind = , Control_L, exec, true
+bind = , Control_R, exec, true
+bind = , Alt_L, exec, true
+bind = , Alt_R, exec, true
+bind = , Shift_L, exec, true
+bind = , Shift_R, exec, true
+bind = , F12, submap, reset  # Emergency escape if voxtype crashes
+submap = reset

hypr/.config/hypr/hypridle.conf

@@ -0,0 +1,20 @@
+general {
+    lock_cmd = pidof hyprlock || hyprlock
+    before_sleep_cmd = loginctl lock-session
+    after_sleep_cmd = hyprctl dispatch dpms on
+    ignore_dbus_inhibit = false
+}
+
+# 5 min → extinction écran
+listener {
+    timeout = 300
+    on-timeout = hyprctl dispatch dpms off
+    on-resume = hyprctl dispatch dpms on
+}
+
+# 10 min → verrouillage
+listener {
+    timeout = 600
+    on-timeout = loginctl lock-session
+}
+

hypr/.config/hypr/hyprland.conf

@@ -0,0 +1,351 @@
+
+################
+### MONITORS ###
+################
+
+# Configuration dynamique des moniteurs via monitor-manager.sh
+# See https://wiki.hypr.land/Configuring/Monitors/
+source = ~/.config/hypr/monitors.conf
+
+# Exécution du script de gestion automatique des moniteurs
+exec-once = ~/.config/hypr/monitor-events.sh
+
+# Configuration des workspaces (sera mise à jour dynamiquement)
+source = ~/.config/hypr/workspaces.conf
+
+###################
+### MY PROGRAMS ###
+###################
+
+# See https://wiki.hypr.land/Configuring/Keywords/
+
+# Set programs that you use
+$terminal = alacritty
+$menu = fuzzel
+$pass = tessen
+
+
+#################
+### AUTOSTART ###
+#################
+
+# Autostart necessary processes (like notifications daemons, status bars, etc.)
+# Or execute your favorite apps at launch like this:
+
+# exec-once = $terminal
+exec-once = nm-applet
+exec-once = blueman-applet
+exec-once = waybar -c ~/.config/waybar/config_hyprland &
+exec-once = hyprpaper
+exec-once = hyprsunset -t 4500
+exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
+exec-once = hypridle
+exec-once = [workspace special silent] $terminal ncmpcpp
+exec-once = [workspace 1] zen-browser
+exec-once = [workspace 2 silent] thunderbird
+exec-once = super-whisper-linux
+
+#############################
+### ENVIRONMENT VARIABLES ###
+#############################
+
+# See https://wiki.hypr.land/Configuring/Environment-variables/
+
+env = XCURSOR_SIZE,24
+env = HYPRCURSOR_SIZE,24
+
+
+###################
+### PERMISSIONS ###
+###################
+
+# See https://wiki.hypr.land/Configuring/Permissions/
+# Please note permission changes here require a Hyprland restart and are not applied on-the-fly
+# for security reasons
+
+# ecosystem {
+#   enforce_permissions = 1
+# }
+
+# permission = /usr/(bin|local/bin)/grim, screencopy, allow
+# permission = /usr/(lib|libexec|lib64)/xdg-desktop-portal-hyprland, screencopy, allow
+# permission = /usr/(bin|local/bin)/hyprpm, plugin, allow
+
+
+#####################
+### LOOK AND FEEL ###
+#####################
+
+# Refer to https://wiki.hypr.land/Configuring/Variables/
+
+# https://wiki.hypr.land/Configuring/Variables/#general
+general {
+    gaps_in = 0
+    gaps_out = 0
+
+    border_size = 2
+
+    # https://wiki.hypr.land/Configuring/Variables/#variable-types for info about colors
+    col.active_border = rgba(33ccffee) rgba(00ff99ee) 45deg
+    col.inactive_border = rgba(595959aa)
+
+    # Set to true enable resizing windows by clicking and dragging on borders and gaps
+    resize_on_border = true
+
+    # Please see https://wiki.hypr.land/Configuring/Tearing/ before you turn this on
+    allow_tearing = false
+
+    layout = dwindle
+}
+
+# https://wiki.hypr.land/Configuring/Variables/#decoration
+decoration {
+    rounding = 4
+    rounding_power = 2
+
+    # Change transparency of focused and unfocused windows
+    active_opacity = 1.0
+    inactive_opacity = 1.0
+
+    shadow {
+        enabled = true
+        range = 4
+        render_power = 3
+        color = rgba(1a1a1aee)
+    }
+
+    # https://wiki.hypr.land/Configuring/Variables/#blur
+    blur {
+        enabled = true
+        size = 8
+        passes = 2
+
+        vibrancy = 0.1696
+        special = true # Enable blur for special workspace background
+        popups = true # Enable blur for popups and layer surfaces
+        popups_ignorealpha = 0.2 # Apply blur even on semi-transparent popups
+    }
+    
+    dim_special = 0.5 # Darken background behind special workspace (0.0 = no dim, 1.0 = black)
+}
+
+# https://wiki.hypr.land/Configuring/Variables/#animations
+animations {
+    enabled = yes, please :)
+
+    # Default animations, see https://wiki.hypr.land/Configuring/Animations/ for more
+
+    bezier = easeOutQuint,0.23,1,0.32,1
+    bezier = easeInOutCubic,0.65,0.05,0.36,1
+    bezier = linear,0,0,1,1
+    bezier = almostLinear,0.5,0.5,0.75,1.0
+    bezier = quick,0.15,0,0.1,1
+
+    animation = global, 1, 10, default
+    animation = border, 1, 5.39, easeOutQuint
+    animation = windows, 1, 4.79, easeOutQuint
+    animation = windowsIn, 1, 4.1, easeOutQuint, popin 87%
+    animation = windowsOut, 1, 1.49, linear, popin 87%
+    animation = fadeIn, 1, 1.73, almostLinear
+    animation = fadeOut, 1, 1.46, almostLinear
+    animation = fade, 1, 3.03, quick
+    animation = layers, 1, 3.81, easeOutQuint
+    animation = layersIn, 1, 4, easeOutQuint, fade
+    animation = layersOut, 1, 1.5, linear, fade
+    animation = fadeLayersIn, 1, 1.79, almostLinear
+    animation = fadeLayersOut, 1, 1.39, almostLinear
+    animation = workspaces, 1, 1.94, almostLinear, fade
+    animation = workspacesIn, 1, 1.21, almostLinear, fade
+    animation = workspacesOut, 1, 1.94, almostLinear, fade
+}
+
+# Ref https://wiki.hypr.land/Configuring/Workspace-Rules/
+# "Smart gaps" / "No gaps when only"
+# uncomment all if you wish to use that.
+# workspace = w[tv1], gapsout:0, gapsin:0
+# workspace = f[1], gapsout:0, gapsin:0
+# windowrule = bordersize 0, floating:0, onworkspace:w[tv1]
+# windowrule = rounding 0, floating:0, onworkspace:w[tv1]
+# windowrule = bordersize 0, floating:0, onworkspace:f[1]
+# windowrule = rounding 0, floating:0, onworkspace:f[1]
+workspace = special, gapsout:100, gapsin:20
+
+# See https://wiki.hypr.land/Configuring/Dwindle-Layout/ for more
+dwindle {
+    preserve_split = true # You probably want this
+    special_scale_factor = 0.8 # Scale factor for special workspace windows (0.8 = 80% with visible padding)
+}
+
+# See https://wiki.hypr.land/Configuring/Master-Layout/ for more
+master {
+    new_status = master
+}
+
+# https://wiki.hypr.land/Configuring/Variables/#misc
+misc {
+    force_default_wallpaper = -1 # Set to 0 or 1 to disable the anime mascot wallpapers
+    disable_hyprland_logo = false # If true disables the random hyprland logo / anime girl background. :(
+}
+
+
+#############
+### INPUT ###
+#############
+
+# https://wiki.hypr.land/Configuring/Variables/#input
+input {
+    kb_layout = fr
+    kb_variant = azerty
+    # kb_variant = ergol
+    kb_model =
+    kb_options =
+    kb_rules =
+
+    follow_mouse = 1
+
+    sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
+
+    touchpad {
+        natural_scroll = true
+    }
+}
+
+# Configuration souris multi-écrans
+cursor {
+    no_break_fs_vrr = true
+    min_refresh_rate = 24
+}
+
+# https://wiki.hypr.land/Configuring/Variables/#gestures
+# gestures {
+#     workspace_swipe = true
+#     workspace_swipe_fingers = 3
+# }
+gesture = 3, horizontal, workspace
+
+
+###################
+### KEYBINDINGS ###
+###################
+
+# See https://wiki.hypr.land/Configuring/Keywords/
+$mainMod = SUPER # Sets "Windows" key as main modifier
+
+# Exit
+bind = $mainMod SHIFT, e, exec, hyprctl dispatch exit 0 # exit Hyprland
+# Example binds, see https://wiki.hypr.land/Configuring/Binds/ for more
+bind = $mainMod, Return, exec, $terminal
+bind = $mainMod, q, killactive,
+bind = $mainMod, f, fullscreen,
+bind = $mainMod, d, exec, $menu
+bind = $mainMod, p, exec, $pass
+
+# Move focus with mainMod + arrow keys
+bind = $mainMod, h, movefocus, l
+bind = $mainMod, l, movefocus, r
+bind = $mainMod, k, movefocus, u
+bind = $mainMod, j, movefocus, d
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+
+# Navigate between monitors
+bind = $mainMod CTRL, h, focusmonitor, l
+bind = $mainMod CTRL, l, focusmonitor, r
+bind = $mainMod CTRL, left, focusmonitor, l
+bind = $mainMod CTRL, right, focusmonitor, r
+
+# Move windows
+bind = $mainMod SHIFT, left, movewindow, l
+bind = $mainMod SHIFT, right, movewindow, r
+bind = $mainMod SHIFT, up, movewindow, u
+bind = $mainMod SHIFT, down, movewindow, d
+bind = $mainMod SHIFT, h, movewindow, l
+bind = $mainMod SHIFT, l, movewindow, r
+bind = $mainMod SHIFT, k, movewindow, u
+bind = $mainMod SHIFT, j, movewindow, d
+
+# Move windows between monitors
+bind = $mainMod SHIFT CTRL, h, movewindow, mon:l
+bind = $mainMod SHIFT CTRL, l, movewindow, mon:r
+bind = $mainMod SHIFT CTRL, left, movewindow, mon:l
+bind = $mainMod SHIFT CTRL, right, movewindow, mon:r
+
+# Switch workspaces with mainMod + [0-9]
+bind = $mainMod, code:10, workspace, 1
+bind = $mainMod, code:11, workspace, 2
+bind = $mainMod, code:12, workspace, 3
+bind = $mainMod, code:13, workspace, 4
+bind = $mainMod, code:14, workspace, 5
+bind = $mainMod, code:15, workspace, 6
+bind = $mainMod, code:16, workspace, 7
+bind = $mainMod, code:17, workspace, 8
+bind = $mainMod, code:18, workspace, 9
+bind = $mainMod, code:19, workspace, 10
+
+# Move active window to a workspace with mainMod + SHIFT + [0-9]
+bind = $mainMod SHIFT, code:10, movetoworkspace, 1
+bind = $mainMod SHIFT, code:11, movetoworkspace, 2
+bind = $mainMod SHIFT, code:12, movetoworkspace, 3
+bind = $mainMod SHIFT, code:13, movetoworkspace, 4
+bind = $mainMod SHIFT, code:14, movetoworkspace, 5
+bind = $mainMod SHIFT, code:15, movetoworkspace, 6
+bind = $mainMod SHIFT, code:16, movetoworkspace, 7
+bind = $mainMod SHIFT, code:17, movetoworkspace, 8
+bind = $mainMod SHIFT, code:18, movetoworkspace, 9
+bind = $mainMod SHIFT, code:19, movetoworkspace, 10
+
+# Example special workspace (scratchpad)
+bind = $mainMod, s, togglespecialworkspace, magic
+bind = $mainMod SHIFT, s, movetoworkspace, special:magic
+
+# Scroll through existing workspaces with mainMod + scroll
+bind = $mainMod, Space, workspace, previous
+
+# Move/resize windows with mainMod + LMB/RMB and dragging
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+
+# Laptop multimedia keys for volume and LCD brightness
+bindel = ,XF86AudioRaiseVolume, exec, wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 5%+
+bindel = ,XF86AudioLowerVolume, exec, wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%-
+bindel = ,XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bindel = ,XF86AudioMicMute, exec, wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle
+bindel = ,XF86MonBrightnessUp, exec, brightnessctl -e4 -n2 set 5%+
+bindel = ,XF86MonBrightnessDown, exec, brightnessctl -e4 -n2 set 5%-
+
+# Requires playerctl
+bindl = , XF86AudioNext, exec, playerctl next
+bindl = , XF86AudioPause, exec, playerctl play-pause
+bindl = , XF86AudioPlay, exec, playerctl play-pause
+bindl = , XF86AudioPrev, exec, playerctl previous
+
+# printscreen
+
+bind = , PRINT, exec, ~/.local/bin/sway/rofi_screenshot.sh 2>> ~/tmp/rofi_debug.log
+
+bind = $mainMod, R, resizeactive, exact 66% 100%
+
+# Couvercle laptop
+bindl = , switch:on:Lid Switch,  exec, ~/.config/hypr/lid.sh
+bindl = , switch:off:Lid Switch, exec, ~/.config/hypr/lid.sh
+
+# Info moniteurs
+bind = $mainMod SHIFT CTRL, M, exec, notify-send "Monitors" "$(hyprctl monitors | grep -E '^Monitor|^\s+at|^\s+resolution' | sed 's/^\s*/  /')"
+
+bind = $mainMod SHIFT, R, exec, super-whisper-linux trigger toggle
+
+##############################
+### WINDOWS AND WORKSPACES ###
+##############################
+
+# See https://wiki.hypr.land/Configuring/Window-Rules/ for more
+# See https://wiki.hypr.land/Configuring/Workspace-Rules/ for workspace rules
+
+windowrule = match:class nm-connection-editor, float on
+windowrule = match:class blueman-manager, float on
+
+source = ~/.config/hypr/hyprland-gui.conf
+source = ~/.config/hypr/conf.d/*.conf
+

hypr/.config/hypr/hyprlock.conf

@@ -0,0 +1,62 @@
+general {
+    hide_cursor = true
+    grace = 0
+}
+
+# Fond : screenshot flouté + assombri
+background {
+    monitor =
+    path = screenshot
+    blur_size = 7
+    blur_passes = 3
+    brightness = 0.7
+    contrast = 0.9
+    vibrancy = 0.2
+}
+
+# Heure
+label {
+    monitor =
+    text = cmd[update:1000] echo "$(date +'%H:%M')"
+    color = rgba(ffffffff)
+    font_size = 80
+    font_family = Noto Sans Mono Bold
+    position = 0, 120
+    halign = center
+    valign = center
+}
+
+# Date
+label {
+    monitor =
+    text = cmd[update:60000] LC_TIME=fr_FR.UTF-8 date +'%A %d %B'
+    color = rgba(ffffffbb)
+    font_size = 22
+    font_family = Noto Sans Mono
+    position = 0, 40
+    halign = center
+    valign = center
+}
+
+# Champ de saisie
+input-field {
+    monitor =
+    size = 320, 52
+    outline_thickness = 2
+    dots_size = 0.25
+    dots_spacing = 0.2
+    dots_center = true
+    outer_color = rgba(ffffff44)
+    inner_color = rgba(00000099)
+    font_color = rgba(ffffffff)
+    fade_on_empty = true
+    placeholder_text = <i>Mot de passe</i>
+    check_color = rgba(00ff99cc)
+    fail_color = rgba(ff5555cc)
+    fail_text = <i>Raté ($ATTEMPTS)</i>
+    capslock_color = rgba(ffaa00cc)
+    numlock_color = -1
+    position = 0, -40
+    halign = center
+    valign = center
+}

hypr/.config/hypr/hyprpaper.conf

@@ -0,0 +1,3 @@
+preload = /home/lafrite/Images/Wallpapers/coraill.jpg
+
+wallpaper = ,/home/lafrite/Images/Wallpapers/coraill.jpg

hypr/.config/hypr/lid.sh

@@ -0,0 +1,2 @@
+#!/usr/bin/env bash
+~/.config/hypr/monitor-manager.sh

hypr/.config/hypr/monitor-events.sh

@@ -0,0 +1,29 @@
+#!/usr/bin/env bash
+# Écoute les événements Hyprland IPC et reconfigure les moniteurs à chaud
+
+MANAGER=~/.config/hypr/monitor-manager.sh
+SOCKET="/tmp/hypr/$HYPRLAND_INSTANCE_SIGNATURE/.socket2.sock"
+
+# Attendre que Hyprland soit prêt
+until [[ -S "$SOCKET" ]]; do sleep 0.2; done
+sleep 1
+
+# Configuration initiale
+"$MANAGER"
+
+# Debounce : annule et replanifie si plusieurs événements arrivent d'un coup (dock, etc.)
+PENDING_PID=""
+configure_debounced() {
+    [[ -n "$PENDING_PID" ]] && kill "$PENDING_PID" 2>/dev/null
+    (sleep 0.8; "$MANAGER") &
+    PENDING_PID=$!
+}
+
+# Écouter la socket IPC
+socat -u "UNIX-CONNECT:$SOCKET" STDOUT | while IFS= read -r line; do
+    case "${line%%>>*}" in
+        monitoradded|monitorremoved)
+            configure_debounced
+            ;;
+    esac
+done

hypr/.config/hypr/monitor-manager.sh

@@ -0,0 +1,61 @@
+#!/usr/bin/env bash
+# Configure les moniteurs via hyprctl keyword (pas de reload, pas d'écriture de fichiers)
+
+PHILIPS="PHL 223V5"
+SAMSUNG="LS27A600U"
+
+is_lid_closed() {
+    for path in /proc/acpi/button/lid/LID0/state \
+                /proc/acpi/button/lid/LID/state  \
+                /proc/acpi/button/lid/LID1/state; do
+        [[ -r "$path" ]] && grep -q "closed" "$path" && return 0
+    done
+    return 1
+}
+
+main() {
+    local json
+    json=$(hyprctl monitors all -j 2>/dev/null)
+
+    local philips_name samsung_name
+    philips_name=$(echo "$json" | jq -r '[.[] | select(.description | contains("PHL 223V5"))][0].name // empty')
+    samsung_name=$(echo  "$json" | jq -r '[.[] | select(.description | contains("LS27A600U"))][0].name // empty')
+
+    local -a others=()
+    while IFS= read -r name; do
+        [[ -n "$name" ]] && others+=("$name")
+    done < <(echo "$json" | jq -r '.[] | select(.name != "eDP-1") | select(.description | test("PHL 223V5|LS27A600U") | not) | .name')
+
+    local has_externals=false
+    [[ -n "$philips_name" || -n "$samsung_name" || ${#others[@]} -gt 0 ]] && has_externals=true
+
+    # Lid fermé + aucun externe → veille
+    if is_lid_closed && [[ "$has_externals" == false ]]; then
+        systemctl suspend
+        return
+    fi
+
+    # eDP-1 : actif si lid ouvert, désactivé si lid fermé
+    if is_lid_closed; then
+        hyprctl keyword monitor "eDP-1,disable"
+    else
+        hyprctl keyword monitor "eDP-1,preferred,0x0,1"
+    fi
+
+    # Philips portrait (1920x0, à droite de eDP-1)
+    [[ -n "$philips_name" ]] && \
+        hyprctl keyword monitor "$philips_name,1920x1080@60,1920x0,1,transform,1"
+
+    # Samsung (3000x0 = 1920 eDP-1 + 1080 Philips portrait)
+    [[ -n "$samsung_name" ]] && \
+        hyprctl keyword monitor "$samsung_name,2560x1440@74.971,3000x0,1"
+
+    # Écrans inconnus (à droite de Samsung)
+    local x=5560
+    for name in "${others[@]}"; do
+        hyprctl keyword monitor "$name,preferred,${x}x0,1"
+        ((x += 1920))
+    done
+}
+
+main

hypr/.config/hypr/monitor-menu.sh

@@ -0,0 +1,36 @@
+#!/usr/bin/env zsh
+
+# Menu de sélection des modes d'affichage pour Hyprland
+# Utilise fuzzel comme sélecteur
+
+# Options du menu
+menu_items="🏠 Internal - Écran portable seul
+🖥️ Desk - Bureau (2 écrans externes)
+🎒 Nomad - Portable + externe(s)
+🔄 Auto - Détection automatique"
+
+# Afficher le menu et capturer la sélection
+selected=$(echo "$menu_items" | fuzzel --dmenu --prompt="Mode d'affichage: " --width=40 --lines=4)
+
+# Extraire le mode de la sélection
+case "$selected" in
+    *"Internal"*)
+        mode="internal"
+        ;;
+    *"Desk"*)
+        mode="desk"
+        ;;
+    *"Nomad"*)
+        mode="nomad"
+        ;;
+    *"Auto"*)
+        mode="auto"
+        ;;
+    *)
+        # Annulation ou sélection invalide
+        exit 0
+        ;;
+esac
+
+# Exécuter le changement de mode
+~/.config/hypr/monitor-manager.sh "$mode"

hypr/.config/hypr/monitors.conf

@@ -0,0 +1,4 @@
+# eDP-1 toujours à scale 1 dès le boot
+monitor=eDP-1,preferred,auto,1
+# Catch-all pour les autres
+monitor=,preferred,auto,auto

hypr/.config/hypr/workspaces.conf

@@ -0,0 +1,20 @@
+# Quand un moniteur est absent, ses workspaces rejoignent eDP-1 automatiquement
+# → tous les 10 workspaces sont toujours accessibles
+
+# eDP-1 (laptop) : 1-4
+workspace = 1,  monitor:eDP-1,   default:true
+workspace = 2,  monitor:eDP-1
+workspace = 3,  monitor:eDP-1
+workspace = 4,  monitor:eDP-1
+
+# DVI-I-1 (Samsung) : 5-7
+workspace = 5,  monitor:DVI-I-1, default:true
+workspace = 6,  monitor:DVI-I-1
+workspace = 7,  monitor:DVI-I-1
+
+# DVI-I-2 (Philips portrait) : 8-10
+workspace = 8,  monitor:DVI-I-2
+workspace = 9,  monitor:DVI-I-2
+workspace = 10, monitor:DVI-I-2
+
+workspace = special, gapsout:100, gapsin:20